The multi-functional laminating machine is to coat plastic film with adhesive and press it with paper as the substrate. After being pressurized by rubber drum and heating drum, it forms a product of paper plastic integration.

When the machine is powered on, the upper and lower heating plates of the machine start to heat up, and the vacuum system starts to work, so that the space in the working area is close to the vacuum state, to ensure that all the air between the pressed material and the material is discharged.

Polishing machine maintenance: 1. Check the electrical circuit regularly, and replace it immediately if it is damaged. 2. Check the parts of the equipment regularly and reinforce them immediately if they are loose. 3.Add lubricating oil to the oil filling hole regularly. 4.Before work to try the boo......

The operation method of the film pressing machine is as follows: 1 Before starting the machine, it is necessary to check whether the fastening bolts of the equipment are loose, clean all parts of the laminating machine with thinning water, and adjust the glue again later. Do not store any sundri......

The use of membrane pressure glue requirements

The use of membrane pressure glue requirements